LABEL WEAVING MACHINE
MÜGRIP® MBJ8.9 1/1380

For labels and pictures with slit selvedges.

Rapier weaving machines from the MBJ range are the world’s most frequently used machines for the production of labels and pictures with slit selvedges. In fact, they represent the unique weaving system to have been specially developed and manufactured for this market segment. The robust and compact design of the jacquard superstructure directly on top of the basic machine, limited machine height and minimal weight all facilitate the installation and operation of MÜGRIP® weaving machines in bigger and smaller facilities and buildings with several storeys. Other characteristics that make these machines interesting from the economical and an ecological standpoint are the high speeds, great flexibility in label weaving, short over-change times, limited maintenance cost, low energy consumption and a high resale value. The MÜGRIP® MBJ8.9 1/1380 offers convincing performance, quality and low energy consumption. The optimised machine constitutes a new addition to the MBJ series of rapier label weaving machines.

  • High production speed
  • Low energy consumption
  • Best fabric quality
  • The weaving machine is ideally suited to the production of labels and pictures with slit selvedges.
  • Max. nominal width of 1346 mm. Perfect for all order sizes, high efficiency due to reduced down-times (short change-over times).
  • SPE3 Jacquard model. Proven system for high speeds and low wear and tear.
  • MLC machine control / network ready. A new single control system monitors and regulates the entire process sequences of the label weaving machine. 
  • MÜDATA® M series. With touch screen, newest operating system, modern layout, simple and intuitive operating.
  • Productivity. Energy efficient drive technology, high production speed, with lowest waste rate and best fabric quality.
  • Rapier drive. The rapier drive provides smooth weft insertion for the processing of various yarns in the range of 22 - 1400 dtex.
  • Universal rapier. The lightweight universal rapier ensures extended head and tape operational life.
  • Weft thread feeder. Electronically controlled IRO G2 STAR weft thread feeders for up to twelve colours (for enhanced user comfort and constant thread tension). Individually adjustable speeds and a remapping/alternate function are available for every individual weft colour.
  • For labels with highest quality demands. Cross beam with outstanding reed beat-up, optimised full width temple bar and spring loaded rod deflection. This makes the machine most suitable for high-quality labels; not only the optimised full width temple bar and spring loaded rod deflection, but also the proven, vertical reed beat-up with a short distance to the temple bar constitute important qualitative characteristics for the production of labels with minimal to very high weft densities and diverse weave structures in thicknesses of up to 2 mm.
Reed width (max.) [mm]1380
Nominal width (max.) [mm]1346
Jacquard machine (shedding device)SPE3 series up to 1536 control functions
Weave typesTaffetaSatin
Warp density (ends/cm)54,6109,2
Harness settings3x422T, 4x316T, 6x211T/S, 10x130SS, 12x105S and many other variations for ON-LOOM (hot slitting) or OFF-LOOM (ultrasonic slitting) or in combination (hot-/ ultrasonic slitting)

 

Weft feederElectronically controlled for up to 12 colours IRO G2 STAR
Weft insert systemUniversal rapier for various yarn counts between 22 and 1400 dtex.
Lightweight designed rapier head for outstanding long operational life
Cross beamRapier drive for smooth weft feeding with the unique vertical reed beat-up and for labels and high weft density fabrics optimised temple bar
Machine controlMLC machine control / network ready and MÜDATA® M series for the entire machine monitoring and regulation
Main driveVARISPEED – Energy-efficient machine drive with programmable speed changes within the pattern design
Fabric take-off driveVARIPICK – Energy-efficient fabric take off drive for programmable weft density variations from 18 to 120 picks per cm within the pattern 
Warp let-off driveEnergy-efficient and electronically controlled warp let-off drive with warp tension monitoring up to a warp beam diameter of 800 mm
Selvedge formationTC2 cutting system for a good on loom selvedge quality. Due to the same electrical resistance an identical cutting temperature across the entire fabric width can be reached
Dimension (mm)Width: 3950 (with thread feeder)
Width: 2955 (without thread feeder)
Depth: 2035
Height: 3645 (machine)
Height: 3875 (room)
MBJ8.9.pdf 		EN 980.81 KB
MBJ8.9.pdf 		ZH 1.07 MB